Massive Heater Workshop
 Home
 Adobe-heater examples
 Massive heater workshop
 Tadelakt workshop
 Tadelakt products
 Tulikivi soapstone-heaters
 Tulikivi models
 Tulikivi link
 Tulikivi information days
 
 Cast iron parts
 Finovens
 
 
 
 
 Address - Information
New Workshop week 14, from 4 April to 8 April 2011.

 
We are planning a new heater-workshop. With 7 or 8 participants we are going to build a heater with a heated bench and a furnace with bake oven. We’ll start on Monday and hope to make the first little fire together on Friday.
Participants will be constantly guided by two or three skilled heater builders.

The workshop-location is in Silvolde, near Doetinchem, Netherlands.

Information about the planned heaters:
During this workshop we will be building two heater models made of pre-cut refractory bricks.
  Heater 1: the Tupla Lauri- is a “tunnel-hearth” H 260 x W 120 x D 90 cm. will be made with refractory and adobe bricks, and will be plastered with loam. In the heater we’ll place a heat exchanger. This heater will be connected to the chimney by a heated bench L 180 x H 50 x D 40 cm. Behind the bench we are making a separation wall of adobe bricks between the scullery and the living room.
This heater gets a fireplace-door with glass in the living room, and at the scullery side a closed cast iron door.
 
Heater 2
: the Hemmo-furnace is H 92 x D 74 x W 124 cm and weights 1300 kg. This heater with bake-oven will get a central location in the kitchen. Materials: refractory and ordinary bricks and stucco.

 

Programma:
We like to start early at 08 o’clock. We are planning two coffee/tea brakes, a lunch and an evening meal. There will be time enough to ask questions or discuss individual projects.
 
We think about two evening-presentations: about heater building and heating with wood. The workshop starts with an acquaintance on Monday 4 April 08 o’clock and will probably end on Friday 8 April around 13 o’clock.
 
  For whom:
This heater-workshop is meant for everyone who is interested in masonry heaters, or has plans to build one. We will try to show all aspects of the construction of masonry heaters.
Subjects like: foundation, insulation, working with the tools/machines, reading drawings, materials.
We have experienced that participants will be able to build their own heater after doing a workshop. We can deliver all materials needed for a DIY heater, look at www.castironparts.com

Costs
:
€ 825, - including VAT, every participant will get an invoice.

Reservation:
By phone (0031.547351270) or by email:
As soon as the amount is on our bank account,
your reservation is completed. First-come, first served.

Discount:
For participants, we have a special reduction pricelist.
   
  Meals and care:
On the ground there is a possibility to camp (campers/tent). The camper can use toilet and shower.
The costs of care and meals will be announced later.
(Not included in workshop)
Photo: Farm workshop-location near Silvolde.
Clothing:
Please bring your own work clothes and work shoes. And if you want and have, your favourites masonry tools.

Participation to the workshop is at your own risk.
The participation to the heater building-workshop and the use of tools and machines is totally at your own risk.

Any questions? Mail or phone us!

We like to hear from you!
   
   
Adobe-heater | Castironparts | Finnoven | Woodcooker
All rights reserved © Vuurmeesters.com | Disclaimer | Contact